Plough Share mixer consists of a horizontal
cylindrical container with multiple plough shaped
shovels mounted on the main shaft. With 30%
- 70 % filling of the container, the size, number
and positioning, geometric shape and peripheral
speed of the mixing elements are co-ordinated
in such a way that they produce a whirling,
three-dimensional product movement. The resultant
turbulence in the mix, whereby the entire product
is constantly involved in the mixing process,
prevents the formation of dead-spots or low-movement
zones in the mixing container and ensures fast
and homogenous mixing. The mixing elements are
specially designed to lift the material from
the inside wall of the container without squashing
the particles against the wall. In addition,
separately driven high-speed choppers can be
installed to disperse agglomerations and control
granulation during the mixing process in co-ordination
with the mixing elements.
Single or multiple choppers are located in the
lower part of the mixing container in such a
way that the chopper assembly is inserted into
the wall of the container at points in between
the flights of two adjacent mixing shovels.
The shovels operate beneath the rotating choppers.
Together with the mixing shovels, the high-speed
choppers remove lumps in the raw material, chop
pasty additives and prevent formation of agglomerates
on liquid addition. The choppers can be switched
on and off, independent of the main drive shaft.
Thus, the influence of the chopper action on
the product mix can be controlled.
- Available in working
capacity of 5 liters – 5000 liters.
- Available in all grades
of stainless steel, carbon steel and
special alloy steels.
- Worm Reduction Gearbox.
- Feeding aperture at
- Centrally located
flush bottom discharge valve.
- Designed for atmospheric
- Stuffing boxes with
easily disassembled housings. Pure Teflon
gland packing provided.
- Stainless steel surfaces
are polished to desired standards. All
exterior non-stainless steel surfaces
are painted with enamel paint.
- Squirrel Cage, Three
Phase Induction Motor suitable for 415
Volts, 50 Hz.
- Single Speed Drive.
- Mixer is mounted on
supports with adequate discharge clearance.
- Chopper Assemblies.
- Jacket for heating,
- Wear resistant liner
plates for abrasive products.
- Split design stuffing
boxes, Air-purging stuffing boxes, Mechanical
- Good Manufacturing
Practice (GMP) models.
- Explosion-proof motors,
Variable Speed Drives along with Electrical
- Inspection, Cleaning
windows on the container.
- Spraying system for
- Processing bulk materials
(powdery, granular, fibrous).
- Addition of liquids
to dry solid materials (moistening +
- Processing pumpable